Introduction
ZS Stainless steel horizontal single-stage centrifugal pump is made by advanced techniques such as pressing bulging welling of corrosion resistant plate. It is a new generation centrifugal pump initiated in and may replace traditional IS pump and common corrosion proof pump. It features beautiful appearance, light and handy structure, high efficiency and energy saving, durable, corrosion proof, low noise, etc.

Connotation of the type
Z S 65 - 50 - 200 / 6 - 11.0
Z Stainless steel horizontal single-stage centrifugal pump
S Stub shaft(mm)
65 Diameter of suction port(mm)
50 Diameter of discharge port(mm)
200 Nominal diameter of impeller(mm)
6 Frequency 60Hz(For 50hz omitted)
11.0 Motor Power(kW)

Application
ZS Stainless steel horizontal single-stage centrifugal pump is a sort of multifunction product with wide application. It may transmit various mediums including water or industrial liquid and is suitable for different temperature, flow rate and range of pressure. Its typical application mainly in codes the following aspects
Water supply: filtration in water works, transportation and subarea water carriage, pressurization of main duct;
Industrial pressurization: flow wetting system, cleaning system;
Transportation of industrial liquid: water supply of boiler, condensed system, cooling and air-conditioning system, machine tool support, acid and alkali transportation;
Water treatment: distilled water system or separator, swimming pool, etc.;
Irrigation of agricultural land, petrochemical industry, medicine and sanitation, etc.

Installation requirements
ZS Stainless steel horizontal single-stage centrifugal pump is the direct connection by pump shaft ,composed of pump ,pump shaft and standard motor:
1The pump shall be installed on the ventilating and anti-freezing place;
2The installation of the pump shall ensure that the pump will not be influenced by the tension of pipeline;
3If the pump is installed outdoor ,suitable outer cover must be configured to prevent electric elements from water inflow or coagulating dew;
4To facilitate in section and maintenance ,enough space must be left around the machine group ;
5Electric wiring device shall guarantee that the pump will not be damaged by lack of phase ,unstable voltage ,current leakage and overload ;
6The pump shall be installed on the pedestal horizontally .Horizontal direction is the suction port for the pump ,and vertical direction is the discharge port for the pump .

Operating condition
Clean, thin, non-flammable and explosive, not containing the liquid with solid particle and fibre;
Liquid temperature -20/ +100
Ambient temperature: up to+40
Altitude: up to 1000m
Max. pressure of the system is 10bar.

Motor
TEFC motor,2-pole
Protection class:IP55
Insulation class: F
Standard voltage,
50Hz
1×220V
3×380V

 

ZS Stainless steel horizontal single-stage centrifugal pump(horizontal pump,single-stage pump,centrifugal pump)